,

10082207 ConMet PreSet Steer Hub Assembly – Hub Pilot-10 Stud-ABS


Compare

Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation.

Replaces: CM10018164, CM10018165, CM10018167, CM10018168, CM10018177, CM10018189, CM10018201, CM10018224, CM10018225, CM10018242, CM10018244, CM10020359, CM10026129, CM10026295, CM10032986, CM10032998, CM10034425, CM10041798, CM10045124, CM10045126

$230.00/Each

10082207 ConMet PreSet Steer Hub Assembly

10082207 ConMet PreSet Steer Hub Assembly

The most advanced wheel ends on the market, featuring ConMet wheel seals and bearings.

By replacing your wheel ends with genuine PreSet hubs, you get the following benefits:

  • Minimize downtime
  • Bring down labor costs
  • Diminish potential for errors during reassembly and installation
  • Reduce liability Complete warranty on all components

Ever since ConMet’s PreSet hub assembly was introduced in 1995, truck OEM’s have experienced the ease of its installation process. There’s no need for assembly or bearing adjustment, the PreSet assembly just slides right onto the spindle.

Why shouldn’t technicians in the aftermarket experience the same benefits?

Rebuilding or servicing hubs comes with risks. Servicing a hub oftentimes requires rebuilding the hub by replacing bearing cups and cones, the wheel seal, and manually-adjusting the bearings. Improperly servicing a hub can create a variety of wheel end problems, which could include a wheel off situation, leading to the possibility of serious injury and up to hundreds of thousands of dollars in fines or damages.

Given the risks of rebuilding hubs, what are the benefits of replacing them with ConMet’s PreSet Aftermarket hubs?

  • Besides keeping the truck OEM genuine like it came from the factory, PreSet replacement hubs come with a three-year limited warranty.
  • PreSet hubs are available when you need them since they are stocked in distribution centers.
  • A technician can rebuild a hub in about three hours. On the other hand, that same technician can replace a hub in as little as one hour. This can free up service bays for other service opportunities.
  • Most importantly, replacing hubs gives you peace of mind knowing you did your best to provide protection against potential liability issues.

 

ConMet Cross References / Brochures

 

SKU: CO-10082207 Categories: ,
Weight 38 lbs
10082207 ConMet PreSet Steer Hub Assembly Data
Hub Assembly 10082207
Status Active
Assembly Type PreSet Hub Assembly
Axle Location Front
Axle Name FF
Axle-Specific Specification 5.06″ Turbo
Mounting Hub Piloted – 10 Studs
ABS Yes
ABS Characteristic Has Stamped ABS Ring
Wheel Stud Bolt Circle Diameter 285.75 mm
Wheel Stud 102188
Wheel Stud Standout 2.92″
Detailed On 10082346
Hub Rating 6,600 LBS    2,994 kg
Hub Cap Bolt Circle Diameter 4.500″
Drum Pilot Diameter 8.78″
Bearing Set ½-stand Premium
Fill Hole No Fill Hole
ABS Offset 1.53″
Hub Offset 5.06″
Weight 37.5 LBS    17.0 kg
Machining 10031185
Machined Flange Thickness 1.17″
Casting 10026178
Casting Material A356.0-T61 Aluminum
Seal Vendor ConMet
Bill of Materials — 10082207 ConMet PreSet Steer Hub Assembly
Item Description Material Qty Unit Type
10082385 INSTRUCTIONS AMKT INSTALLATION DOCUMENTATION 1 EA Miscellaneous Shipping Component
10081847 AMKT WARRANTY KIT REGISTRATION WARRANTY DOCUMENTATION 1 EA Miscellaneous Shipping Component
10049237 HUB BX, 14 X 14 X 13, KRFT, CMI AFTERMARKET PACKAGING 1 EA Miscellaneous Shipping Component
103623 PINE-TREE CLIP PLASTIC 2 EA Pine Tree Clip
103602 SHIPPING CAP PLASTIC 1 EA Shipping Cap
10080117 SEAL, PRESET CONMET PREMIUM 1 EA Seal
10033448 BEARING SPACER STEEL 1 EA Bearing Spacer
10041904 CONE, BEARING – OUTBOARD 1/2-STAND; STEEL (PREMIUM) 1 EA Bearing Cone
10041902 CONE, BEARING – INBOARD 1/2-STAND; STEEL (PREMIUM) 1 EA Bearing Cone
10009780 RING, ABS STEEL, 100 TOOTH 1 EA ABS Tone Ring
102188 STUD, WHEEL – PROP CL 10.9 M22 X 1.5MM X 4.09 LG 10 EA Wheel Stud
10041903 CUP, BEARING – OUTBOARD 1/2-STAND; STEEL (PREMIUM) 1 EA Bearing Cup
10041901 CUP, BEARING – INBOARD 1/2-STAND; STEEL (PREMIUM) 1 EA Bearing Cup
10031185 HUB, MACHINED 10026178 HUB, CAST ALUM 1 EA Hub Machining
10026178 HUB, CASTING A356-T6 ALUMINUM 1 EA Hub Casting

CM10018164, CM10018165, CM10018167, CM10018168, CM10018177, CM10018189, CM10018201, CM10018224, CM10018225, CM10018242, CM10018244, CM10020359, CM10026129, CM10026295, CM10032986, CM10032998, CM10034425, CM10041798, CM10045124, CM10045126

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “10082207 ConMet PreSet Steer Hub Assembly – Hub Pilot-10 Stud-ABS”

There are no reviews yet.

We are hiring mechanics and more. Call us today! Dismiss