,

7/8 X 20 Threaded Rod, 14 TPI with Oil Finish

(1 customer review)
Availability:

21 in stock (can be backordered)


7/8 X 20 Threaded Rod, Oil Finish (Diameter x Length), 14 Threads Per Inch

7/8 Inch Diameter Threads – 20 Inches Long, threaded on each end as pictured. See below.

SAE right hand threads on both ends.

$16.89 Each

21 in stock (can be backordered)

Estimate Shipping

Compare

7/8 X 20 Threaded Rod, 14 TPI with Oil Finish

7/8 X 20 Threaded Rod, 14 TPI with Oil Finish

Threaded Rods have multiple applications and uses, but it’s main use is for body mounting and the manufacturing of u-bolts. These rods are produced to SAE-J429. This material is a cold drawn, stress relieved, micro-alloyed, 1541 modified steel. These rods have “cold rolled threads” and cannot be threaded beyond the threads they are manufactured with.

Grade by diameter of rod;

  • 3/8 to 9/16 diameter are Grade 5
  • 5/8 to 1 1/4 diameter are Grade 8

 

Approximate thread lengths are predetermined and are listed below;

  • (Total rod length = Thread length on each end)
    • 8″   to 20″ = 2″-3″
    • 22″ to 30″ = 4″
    • 32″ to 48″ = 6″

 

The only thread pitch we sell are SAE (fine) and are manufactured by rolling a rod between dies creating threads for maximum strength. As stated above, this makes the non-threaded part of the stock slightly smaller in diameter than the diameter of the threads and are not thread-able beyond the way they are.

SKU: 7/8 X 20 Categories: , Tag:

Brand

Dsuban Spring Service Inc.

Dsuban Spring Service and Dsuban.com is a repair facility and distributor of all types of suspension manufacturers. Call on us for your truck and trailer needs.
Dsuban Spring Service Cincinnati Ohio www.dsuban.com,

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. Jud

    Is made to exact outer diameter thread, length slightly varies outside of 4″. The shaft diameter reduced for clearance and assembly. Good bolt.

    Jud

Free UPS Ground Shipping on orders of $99 or more!

X
0